RCU Forums - View Single Post - CMPro Lancair
View Single Post
Old 05-13-2007 | 06:32 PM
  #154  
iFLYrc_Vic
My Feedback: (6)
 
Joined: Aug 2002
Posts: 690
Likes: 0
Received 0 Likes on 0 Posts
From: Columbia, MD
Default RE: CMPro Lancair

It turns out that my cg was at 85mm from the leading edge ! That was probably due to removing the wheel pant and accessories from the nose wheel and replacing it with the fultz strut (no wheel pant). I know better than assuming the cg would not chage much but it was one of those things of getting it in the air. I will be adding enough weight to the firewall to move the cg forward to about 72mm (emty fuel tank). I will post some info on how that works out next week.