I just finished up a Sig Pig myself and used a number of mods found on this thread. I started with a Saito .72 that I had on a 40 size profile and that engine did a fairly good job of getting the bipe around. I tried a number of props and settled on an APC 14x4 that I ran on the profile and found that the bipe could hang on the prop but only at full throttle and on 30% wildcat fuel. I could not accelerate up from a hover, it would only hang there or fall back into a sink. I broke down and bought a Saito 1.00, again because of the number of comments here on this thread and as of last night, it's ready to go all mounted up for this weekend. We will see how she flies with a bit more muscle.... Thanks guys for all the suggestions!


Scott

P.S. the 14x4, .72 and 30% combo would make the prop break into a rip at the bottom of a dive and a fast pass a cross the field. What a cool sound, just like the big boyz!