RCU Forums - View Single Post - BME 50 gas/oil mixture
View Single Post
Old 05-25-2007 | 08:57 PM
  #7  
1080tommy
 
Joined: Apr 2006
Posts: 182
Likes: 0
Received 0 Likes on 0 Posts
From: Mt. Prospect, IL
Default RE: BME 50 gas/oil mixture

I used a laser temp guage and I took a reading off the lower cooling fins, top of engine, and were the spark plug goes into the head. The highest reading was 245 were the plug goes into the head and on the lower cooling fins. Middle point of the engine seemed to be at 198 to 200. I think these temps should be good but then again I am not very knowledgable with gas engines.


Tom