RCU Forums - View Single Post - Transmitter Case
View Single Post
Old 06-01-2007 | 06:32 AM
  #26  
felixone
Member
 
Joined: Apr 2007
Posts: 96
Likes: 0
Received 0 Likes on 0 Posts
From: Lexington, SC
Default RE: Transmitter Case

Ken,

There is nothing wrong with the one from Lowes. I actually like that case, so far it looks to be my best bet. My only hang up, and this is me being a little obsessive is that when I opened it to check it only had the one piece of foam (about 3 inches thick). Yes, I can buy foam to place on the top, but all I have been able to locate is white foam, and this case comes with black/charcoal gray. I know it is anal but I would prefer for the foam to match. However if I continue to look, and I can't find anything better I will be forced to get over this. To be honest the true reason I haven't bought the case from Lowes is I am stalling, hoping the guy from my club will come through this weekend. In the mean time I have been looking around at alternatives.

The funny part of this is, as obsessive as I have been over the TX case it is nothing compared to what I went through over my plane. I am actually doing it again trying to determine what my upgrade plane should be, even though I am no where near the point of actually needing an upgrade plane. Shoot I am still not out of the danger zone of needing a second trainer. This is just what I do, I evaluate all my options very thoroughly. Since I have somewhat limited funds for all of this it is how I combat buyer's remorse. If I spend a little extra time fussing over the details, when I finally make a purchase I do so with the knowledge that I have exhausted all of my options and the choice I made was the best one I could at the time. If I have offended anyone for not jumping on their suggestion, or because I wanted to look around a little more I apologize. I really do appreciate all the suggestions everyone has made, and hopefully so has anyone else who might be also be searching for just the right TX case.

Thanks Again