I just installed the g90 gyro and have a few questions and concerns. Im a newbie, so Im unfamiliar with gyro's. Im running the e-flite brushless motor and 25 amp ESC. I hooked up the gyro with the remote gain using the stock transmitter. According to the book, the gyro stays at 50% and the knob on the controller is at 3 o'clock putting me in heading hold mode, is this correct so far? My problem is I have VERY little room for adjustment. When I go a little more clockwise, the motor will not power up and counter-clockwise the tail wont hold. Sometimes in a hover it just drops and loses all power or twitches badly, what Im I doing wrong here? Please help!