RCU Forums - View Single Post - flyable 3D model for G3.5
View Single Post
Old 07-07-2007 | 09:42 PM
  #3  
tuwood's Avatar
tuwood
Senior Member
 
Joined: Nov 2005
Posts: 841
Likes: 0
Received 0 Likes on 0 Posts
From: Omaha, NE
Default RE: flyable 3D model for G3.5

I did some tweaking on the Yak & got it flying a little better but it still snaps out of any high G maneuver. I changed the ele & rudder throws to 45* & bumped the prop size up to give it more thrust. It's helped quite a bit on hovers & harriers, but I'm still wishing I could find the 40% Carden model I used to have (no clue who made it, got it from KE forums)

I'm thinking it could be that I haven't used the sim in so long that is why i'm having issues. I used to be a uber flyer on the sim rolling harriers on the deck, torque rolls, etc... no problem at all but on my real planes I struggled. Now I can do the harriers, & all the tricks with my real planes and I'm struggling on the sim. hehe go figure.