Here we go again. I was just thinking of starting a new thread on the Spin to see if anone is happy with them.
My original did not work well on the bench. Rough starting and many cutouts at all speeds. I sent it back and got a new one. The new one didn't seem to cutout but was still rough starting. I flew it in my Impact with a Hacker C50 for one flight. It was too hard on the gearbox during start up.
I then put it in my Abbra with the Dualsky and flew about 15 flights. It worked at first but didn't start and idle as well as I'd like and that is why I was fooling with the curve. The expo was neat on the ground but no good in the air. I went back to linear.
On flight 12 or so I thought I heard a cutout. This continued and then on the last flight I heard a noise that sounded like a rough restart. I landed and put in my Hacker Master 0-90.

The Master 0-90/Dualsky combo works great. Starts at 200 to 400 rpm and you can leave it there. I use from 3000 to 3500 mAh per flight on TP5300 Prolites. I'm running the 22x12 and having no heating problems.

I don't understand why they can't make the Spin work as well as the Master 0-90 and have all the added features.

A little shirter this time, Hope it goes through.

Jim