So I get my new Nemesis and I really like what I see. I unpack it and the first thing I do is change the steering servo to the 333 in/oz hitec, and then set up the radio and give it the once over to make sure everything looks OK. A few pulls on the starter and it seems to pull really easy. This is contrary to what I have read about, wearing gloves and getting blisters starting the engine. So I fill it with fuel, attach a glow starter and give the rope 30 some pulls. --- Nothing Nada Zip - but I notice some oil getting all over the car. So I decide to pull the head off to see what gives. Low and Behold I have 2 head gaskets. The 2nd one is not quite where it needs to be. The pictures are worth a thousand words. I reassembeld the head with only one gasket, it didn't appear to be damaged, and It started right up.