ORIGINAL: richgrow
MadMonkey,
Here's Best Flying Plane For OS.46FX Engine Bare ANY!!!!
http://www2.towerhobbies.com/cgi-bin...&I=LXEDP0&P=ML Phoenix Fun Star. I Have one built and used Tower Super Savers $30 Off Discount to get 2 more. Made 2 Seperate Orders. I also have Showtime 50, X-50 Funtana I just lost, Pulse XT and Fliton Extra 330 Freestyle. All Fly with Engine Size You want use. The Fun Star's after $30 Off Tower Super Savers Club E-mail Discount was ONLY $69.99 Or 1/2 to 1/3 Price of other Birds Yet SUPER QUALITY. Below is Tower Hobby Offer I used.
Order today and save $30.00. Place at least a $199 order and for a limited time we'll take $30.00 off the total. All you have to do to claim your savings is click on ad number 011M2 and it will be placed in your shopping cart. This special offer is not retroactive. Please, only one promotional ad number per order.
Since you are a member in good standing of the #1 Super Saver Club, you'll save even more. Order $199 or more and you could enjoy the $30.00 off as well as receive free standard shipping and handling, normally $8.99. Your total member savings for a $199 minimum purchase would be $38.99. Order today and save.
Fun Star Fast and Easier by far to Build and All Ailerons, Rudder and Elevator Come Fully Installed. See My Review I did for R/c Universe of this Bird. I Used Dubros 3D Control Horns, and some other upgrade components to make this into My Funnest to Fly Bird. Need Add Neon Tape for Visability. I put 3 " Light Foam Tires since one Clubs Runway is Field Grass and larger Rear Tires really help. I belong 2 Flying Clubs. FunStar is a really Great 3D and all around Fun Bird to fly. with allittle wind I can almost do Hover LANDING. I use a APC 11 X 5 or APC 11 X 6 Prop on My OS 46FX engine and it seems give it "Unlimited Vertical" Maybe even a APC 11 x 4 sometimes??? I just love Tweaking this Bird to see just How Much it Really is capable of doing. With a Skilled Pilot it seems do All Tricks Our Club Members are Doing With Their Big Gas 23% to 40% Size Birds they have $3,000 to $9,000 in. Even with all My digital servos, reciever etc I have maybe tad over or under $400 Total in this Bird COMPLETE. I Use JR & Hitec with 7 Channel Scan Select Reciever in All My Birds. It's a AMAZING Little Bird You Can Carry in any vehicle But it is Light and Delicate. I Carry Mine on Rake like one in Photo either in Back My 4 X4 or on Work Bench My Trailer. Now Its Bird I always Grab 1st To Fly richgrow If Have any question you Can E-mail Me
[email protected] or
[email protected]
Those are some pretty planes.. The Fun Star looks like a great flying plane and I may order one just for the heck of it, but right now I'm really looking at scale planes that are 3D capable.
Anybody know about the Nitromodels Edge? It's supposed to be VERY lightweight...