RCU Forums - View Single Post - How do you test Engine DB's Properly
View Single Post
Old 09-29-2007 | 08:18 AM
  #3  
pe reivers
Senior Member
 
Joined: Jan 2002
Posts: 6,571
Likes: 0
Received 5 Likes on 5 Posts
From: Arcen, , NETHERLANDS
Default RE: How do you test Engine DB's Properly

All commercially available hobby dB meters (hobby shack etc.) I tested were not off more than 0.5 dB. This is fine for our purpose, even without calibration.
Beware:
some meters reqire you to point the meter at 90° to the noise source, so read the instructions carefully.