So i bought my CX2 on ebay knowing it needed a body, and skids, and the upper rotor head was hit so probably needed that. Since ive never even flown this heli i made some posts here and you have all been very helpful. Shes is now ripped completly apart waiting for parts

Bought with this damage



So i went up on ebay and ordered up a new Eflite aluminum inner shaft with alum head, new outter main shaft, and a shortened flybar. Also ordered a heatsink for the motors, extreme CF tail boom, skids, and body. I have installed the tail boom but the rest is all apart with tiny screws everywhere [X(]

Here is the sexy boom


Here are the skids, and body. You can see where i cut the body to allow air-flow to the 4 in one and motors.


I have also cut pretty much all the plastic off the 4 in 1 to let her stay nice and cool.

The heli came with some mods already "Eflite alum. swash, lower rotor head, upper "which was bent"
bling


Heres how she looked when i got her. I will post my build/progress pics after work. Hopefully my new parts will be here before the weekend.