Community
Search
Notices
E-Flite Helicopters Discuss the line of E-Flite mini and micro helis including the Blade CP, CP Pro, Blade CX, etc

My CX2

Thread Tools
 
Search this Thread
 
Old 10-24-2007 | 08:45 AM
  #1  
Thread Starter
Senior Member
 
Joined: Oct 2007
Posts: 285
Likes: 0
Received 0 Likes on 0 Posts
From: , MI
Default My CX2

So i bought my CX2 on ebay knowing it needed a body, and skids, and the upper rotor head was hit so probably needed that. Since ive never even flown this heli i made some posts here and you have all been very helpful. Shes is now ripped completly apart waiting for parts

Bought with this damage



So i went up on ebay and ordered up a new Eflite aluminum inner shaft with alum head, new outter main shaft, and a shortened flybar. Also ordered a heatsink for the motors, extreme CF tail boom, skids, and body. I have installed the tail boom but the rest is all apart with tiny screws everywhere [X(]

Here is the sexy boom


Here are the skids, and body. You can see where i cut the body to allow air-flow to the 4 in one and motors.


I have also cut pretty much all the plastic off the 4 in 1 to let her stay nice and cool.

The heli came with some mods already "Eflite alum. swash, lower rotor head, upper "which was bent"
bling


Heres how she looked when i got her. I will post my build/progress pics after work. Hopefully my new parts will be here before the weekend.
Old 10-24-2007 | 12:22 PM
  #2  
Senior Member
 
Joined: May 2007
Posts: 175
Likes: 0
Received 0 Likes on 0 Posts
From: CA
Default RE: My CX2

that shaft can be straightened if you want to
just tap it with a hammer on a flat metal surface
with a light shining behind it you'll see the bent part
as the light will go through. since ive learned that
process i've never bought another shaft again.

except when i strip the gears then its done.
wont take you more than 5 min to do that for sure.

but it wont hurt to buy one now and save that just in case you fee like
trying it.

looks like you have a nice project going and we expect to see pics
when its done!! lol.....
Old 10-24-2007 | 12:31 PM
  #3  
Senior Member
 
Joined: Jul 2006
Posts: 1,793
Likes: 0
Received 0 Likes on 0 Posts
From: Takoma Park, MD
Default RE: My CX2

Did the boom set come in black? or did you paint it. I have only seen the white ones
Old 10-24-2007 | 01:25 PM
  #4  
Thread Starter
Senior Member
 
Joined: Oct 2007
Posts: 285
Likes: 0
Received 0 Likes on 0 Posts
From: , MI
Default RE: My CX2

Check ebay there are black ones floating around.
Old 10-24-2007 | 04:43 PM
  #5  
Senior Member
My Feedback: (11)
 
Joined: Apr 2004
Posts: 7,866
Likes: 0
Received 1 Like on 1 Post
From: PDX, OR
Default RE: My CX2

I like the black skids and boom...........................
Old 10-24-2007 | 05:41 PM
  #6  
Thread Starter
Senior Member
 
Joined: Oct 2007
Posts: 285
Likes: 0
Received 0 Likes on 0 Posts
From: , MI
Default RE: My CX2

More..
Heatsink on


4in1 cut to ish. :]

Again


Xtreme skids


Tailboom
Old 10-24-2007 | 06:07 PM
  #7  
J-MICHAEL's Avatar
 
Joined: Sep 2007
Posts: 6,100
Likes: 0
Received 0 Likes on 0 Posts
From: SEQUIM, WA
Default RE: My CX2

Cage, Looking good my friend....I know it's just the begining phases...I can only imagine what it will look like in time...As I've seen your Cars, and Bike, and I'am betting we're all in for a surprise, of how nice your gonna make this thing...! Did ya notice my heli has the silver/blue/chrome theme going on ? Matches my car engine, and car...Lol...As I see similiarities also on your heli with identities similiar to your car... I'am so sold on the black Xtreme skids...I'am definately going for a set of the black to match my CX2 heli...All I've ever seen was the white Xtreme's...And was worried I was going to have to paint them, and I did not want to go that route at all due to scratches and such...Very original...Keep up the good work, I see you in the future moving up, and becoming a good pilot and having the same addiction as I do. The heli's look good in the garage next to all our other toys, that we share the same interests in...!! Take care guy, Jeff
Old 10-24-2007 | 06:36 PM
  #8  
Thread Starter
Senior Member
 
Joined: Oct 2007
Posts: 285
Likes: 0
Received 0 Likes on 0 Posts
From: , MI
Default RE: My CX2

J-MICHAEL : I'm surprised you remembered that the VR6 was mine, i feel special :] haha.

Ya i have a problem with getting the mod-itch, then buying stuff until my bank acount hates me then i stop until the next check :]
Old 10-24-2007 | 07:05 PM
  #9  
Thread Starter
Senior Member
 
Joined: Oct 2007
Posts: 285
Likes: 0
Received 0 Likes on 0 Posts
From: , MI
Default RE: My CX2

I just noticed on my picture with the heatsink, the manual you can see a connector in the batt spot of the 4 & 1, mine dosnt have anything there, is it supposed to be?
Old 10-26-2007 | 08:37 PM
  #10  
Thread Starter
Senior Member
 
Joined: Oct 2007
Posts: 285
Likes: 0
Received 0 Likes on 0 Posts
From: , MI
Default RE: My CX2

So my parts came in today, got her all back together, got the 4 in 1 set up, and almost hovered the whole battery pack my 1st try, this things a **** ton of fun and makes me want to empty my bank account on more helis, ill hold off for now though. This is so addicting it should be illegal. My sisters 1yr old was in awe when i brought it over. Good times.
Old 10-26-2007 | 08:51 PM
  #11  
cx2cp+'s Avatar
Senior Member
 
Joined: Sep 2007
Posts: 702
Likes: 0
Received 0 Likes on 0 Posts
From: , AL
Default RE: My CX2

hey - be careful with that vented 4-in-1 when it is foggy/damp outside - i got moisture condensation in my canopy and on the 4-in-1 case, but my holes are on the sides and it was ok - just stick some tape over the top hole if its damp outside and you get the urge to fly


edge
Old 10-26-2007 | 08:58 PM
  #12  
Thread Starter
Senior Member
 
Joined: Oct 2007
Posts: 285
Likes: 0
Received 0 Likes on 0 Posts
From: , MI
Default RE: My CX2

I have a wide open big basement she stays inside.
Old 10-26-2007 | 10:23 PM
  #13  
Senior Member
 
Joined: Aug 2007
Posts: 864
Likes: 0
Received 0 Likes on 0 Posts
From: Marysville, OH
Default RE: My CX2

Boomtownhobbies.com has black extreme tail sections for cheap ($23?)! Just bought some parts from them. Talked to the guy on the phone, great people! Fast shipping too.
Old 10-27-2007 | 10:45 AM
  #14  
Thread Starter
Senior Member
 
Joined: Oct 2007
Posts: 285
Likes: 0
Received 0 Likes on 0 Posts
From: , MI
Default RE: My CX2

Omg she flys

Old 10-27-2007 | 10:49 AM
  #15  
S!N!ST3R RC hObbys's Avatar
Senior Member
 
Joined: Oct 2007
Posts: 374
Likes: 0
Received 0 Likes on 0 Posts
From: Cullman, AL
Default RE: My CX2

It Flys, yep they do that somtimes! My is still broke dang i wanna fly now.
Old 10-27-2007 | 10:51 AM
  #16  
Thread Starter
Senior Member
 
Joined: Oct 2007
Posts: 285
Likes: 0
Received 0 Likes on 0 Posts
From: , MI
Default RE: My CX2

I was just excited because i bought it broke, and put all those mods on it before even 1 flight :]
Old 10-27-2007 | 04:30 PM
  #17  
Senior Member
 
Joined: Aug 2007
Posts: 864
Likes: 0
Received 0 Likes on 0 Posts
From: Marysville, OH
Default RE: My CX2

They always look like a Frankenstein with no body on them. Wires and motors just out for the world to see!

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.