RCU Forums - View Single Post - 2/56 to 4/40 swap

11-14-2007 | 01:54 PM

#4

Dr1Driver

Senior Member

Joined: Jul 2002

Posts: 3,770

Likes: 0

Received 2 Likes on 2 Posts

From: Spartanburg, SC

RE: 2/56 to 4/40 swap

2-56 is fine IF you don't use full-thread rods. I'd use a threaded clevis on the control surface end and a "Z" bend at the servo. If you want to use ball links, get a solder-on threaded coupler for the unthreaded end.

Dr.1

Reply Like