Hi to anyone,

First of all I like to tell u that I may will be consented on the Areas India, Kentucky, Illinois, Missouri, Tennessee, but this isn’t my the last choice , it is still up to the Job situation and the Possibilities to get an job which Satisfying my needs.

@ Chuckw
So that for I also interest on that job in central CA (maintenance Fork lifters Junghans ) it would be nice to have some more information’s about that Company, if u don’t mind, Please give me a Email Address which I can use to get in touch with( just Pn Me ).

@All
Anyhow, if some of u could give me some Email Addresses form company’s which are looking or needed People with Skills (like I have) for Maintenance on any kind of mechanical machines, please just let me know.
I had learn to Work accurate, had learn (for example) to scrape metal curve for switch gears with a precision form 0.001 mm.( metric)

Well... problem there we are…. The different system between US an Germany, I had learn to handles Meters, Centimetres, millimetres, tenth part millimetres and so forth.

But I think I don’t will get any big problems if the job isn’t precise the same ore fit as he do like before, I still abele to learn and I like too, just like the way I get in to the English league now.

I was surprise (two day’s ago) how my knowledge about English has change by Talking on the phone to my father. The words that I had spoken to him come out from my mind easily and quick. (That’s some kind of satisfaction).

Ok guys… I still didn’t get some answers about my equipments which I like to take to the States, please take a look to the pic. and tell me your views , should I take it or not, down under u could see the rough Prices that I Spent for it.

Self-made NC-Milling machine (3 axis), driveways (Z 14,96) (Y 21,5) (X 47,24) inch, very solid & precise, I just have tanked the best mechanical things to build it up. Resolution each Motor step 0.002 mm, I had use this machine to Produce Parts for our Hobby and sales.

I do not know if I ever would be abele again to build up a second machine like this, anyhow…. It’s so much work to do this.

I also built up the Electric controlling unit, this unit has four outputs so it also could be in use to cut foam ( 4 axis).

Well…. Just only for all the Parts I spent about 1200 € = (1680 $), if I put this Milling machine in to EBay I could bring about 2000 ore 2500 € (without engagement especially if I start with 1 €).

The Next thing I like to take is my lathe - milling combination, I had use this to modify many saw engines and also to build up the NC-Milling Machine.

Well 18 Years ago I spent 1500 € for this lathe and if I should sale it now (eBay)… maybe could get 800 to 1200 €.











Also my two Plotters I like to take to the States, the big one I use to make Printings from wings, airplane body’s and other Drawings, Size maximum A0 ( 250 €)





The Small plotter I just bought copular Months ago ( 540 €) and I just like to use this one to Cut foils ( it’s specialty made for it ).





How about the following Engines, how much do I have to spend if I like to buy them in the States.

Moki S 215 ccm Gasoline brand New never has been in use before ( 2800 €)





Seidel 125 ccm Glow use copular times ( 2500 )





I also like to take one or two model with me, but it’s a quotation of free space in the See box (if I not sales the machines).

Boing Stearman PT 17 with 3W 60 I Engines ( 60 ccm ) Wingspan 94 inch , 35 pounds .





GeeBee Sportster Double Wing , this is the one which I like to install the Moki Engine.

U can get some more information about this Plane (but only in German) by click the link .

http://www.modellbau-barth.de/

ore

http://www.fliegerland-shop.de/eigen...ortster_dd.htm

All the Plywood Parts and the Drawings are made on my NC-Milling Machine and Plotters, Mr. Barth is one of my Customers and I would like to know who produce his Parts after I have left Germany.





A See box will cost me about 2500 - 3000 € ore 3500 - 4200 Dollars, so what should I do, pay the shipment ore Sale everything to save the Money and buy them new…….

Please do not have scruple about the different Voltage ( US 110 V and Germ 240 V) or Hz 60/50, there is noting I could not fix....

By this way, what do u thing would be the best time to change ten money that i´ve got in to US-Dollar, while ore after the presidency Bush, a low Dollar would give me a god change.

See ya as soon as possible