RCU Forums - View Single Post - G90 Problem!
Thread: G90 Problem!
View Single Post
Old 12-07-2007 | 11:00 PM
  #10  
choppersrule
 
Joined: May 2006
Posts: 5,238
Likes: 0
Received 0 Likes on 0 Posts
From: Greenwood, IN
Default RE: G90 Problem!

Flyinsolo11,

Glad you got things together and a happy flyer. Hmmm, I must have an old manual!(lol) Best to ya and happy flying.

Dave / Choppersrule

PS... Those tail motors can got out in a heartbeat, I've had them go bad in 1 or 2 flights.
================================================== ====================================
ORIGINAL: flyinsolo11

Thanks guys for the suggestions!

It happened to be a stupid coincidence. The tail motor happened to go out as I put the new G90 on, lol. That sucked, but now that I have got it all figured out, it is A LOT more fun. When doing basic maneuvers in the little lounge I was practicing in, it was difficult to keep it oriented correctly. Now it is a breeze and I will be practicing nose in here in a bit. I almost didn't want to set her down, I was so comfortable and having so much fun, lol. I would recommend getting it as the CPP is so squirrelly.

By the way, the manual says: "No adjustment of the gyro gain trimmer pot on the 3-in-1 control unit is necessary."