RCU Forums - View Single Post - Need a source for SAFE ball bearings!!!
Old 12-09-2007 | 09:13 PM
  #6  
Old MSgt
 
Joined: Sep 2007
Posts: 706
Received 28 Likes on 24 Posts
From: Catlettsburg, KY
Default RE: Need a source for SAFE ball bearings!!!

Naw hdbeast, I ordered all of'em from Dan's Crafts. They have a big selection of R/C bearings for 99 cents each so I loaded up. Figured if it was listed FOR R/C models that they'd work. Boy, was I wrong. So now I have to order new road wheels (and maybe a lower hull!) and new bearings.

If you don't have OBVIOUS wheel wobble by now you probably got good-grease bearings.

Here I've been running Tamiya tanks all these years and just within the last six months I started reading the forums on R/C tanks. Should have started reading'em sooner so I would have known about 'plastic safe grease'. Seems like when I was HAPPILY IGNORANT I didn't have any problems.

Mike (Old MSgt)