RCU Forums - View Single Post - 2.4gig and extension leads
View Single Post
Old 12-26-2007 | 07:20 PM
  #7  
yeahbaby's Avatar
yeahbaby
My Feedback: (21)
 
Joined: Dec 2001
Posts: 6,564
Received 59 Likes on 48 Posts
From: FT Worth, TX
Default RE: 2.4gig and extension leads

Below is info from one of my previous posts (http://www.rcuniverse.com/forum/m_66...tm.htm#6642304)

I was using the spektrum 2.4 module and receiver.


Sorry about your difficulties Buck. Do not use amplifiers with Spektrum! The following is from Horizon's website:

Q: When using long servo leads and/or Y-harnesses, should I use amplifiers, chokes or other filters?
A: No. Spektrum’s 2.4GHz system is immune to interference caused by long servo leads and there is no need to add filters. In fact, some types of amplified Y-harnesses won’t operate with the Spektrum system.

Here's the full article:
http://www.horizonhobby.com/Articles...ID=1624&Page=2

_____________________________

Team JR ~ Fromeco ~ Desert Aircraft ~ RCU
www.joemcbride.com