RCU Forums - View Single Post - spinner prop washer allow 1.5 turns on the nut

12-26-2007 | 07:51 PM

#7

downunder

Joined: Oct 2002

Posts: 4,527

Likes: 0

Received 1 Like on 1 Post

From: Adelaide, AUSTRALIA

RE: spinner prop washer allow 1.5 turns on the nut

Or use one of these (1/4x28 for the G51). The prop gets drilled/reamed out to suit the OD of the T nut.
http://www3.towerhobbies.com/cgi-bin...&I=LXB952&P=ML

Attached Thumbnails

Reply Like