RCU Forums - View Single Post - Propeller sizing worm can
View Single Post
Old 12-27-2007 | 12:38 PM
  #18  
HighPlains
My Feedback: (1)
 
Joined: Mar 2003
Posts: 5,087
Received 7 Likes on 7 Posts
From: Over da rainbow, KS
Default RE: Propeller sizing worm can

Big difference in automotive vs model is the pressure oil system of the auto engine. Although the rpm on the model engine is much higher, oddly enough the piston velocity is roughly the same. For truly jaw dropping performance, look at F1 car engines. They run around 20,000 rpm and make incredible power.
http://www.f1complete.com/content/view/1283/389/