RCU Forums - View Single Post - Futaba 4.8v Servos with Jaccio 5.2v Regulator
Thread: Futaba 4.8v Servos with Jaccio 5.2v Regulator
View Single Post
Old 01-11-2008 | 08:06 AM
  #9  
Kolsso12's Avatar
Kolsso12
Member
 
Joined: Sep 2003
Posts: 58
Likes: 0
Received 0 Likes on 0 Posts
From: Gothenburg, SWEDEN
Default RE: Futaba 4.8v Servos with Jaccio 5.2v Regulator
Off topic but I did have the same question to Graupner/JR.

There answerer was that 4.8 V servo from Graupner/JR are specified to max 6,3 V. I have a Powerbox regulator that give 5,9 +- 0,1 V or max value at 6 V. That is OK for 4,8 V servo from Graupner/JR.

/Kristian
Kolsso12 is offline  
Reply Like