RCU Forums - View Single Post - MCD SC 480 ESC
Thread: MCD SC 480 ESC
View Single Post
Old 02-14-2008 | 08:56 PM
  #1  
hansvonpensch
Senior Member
 
Joined: Nov 2005
Posts: 468
Likes: 0
Received 0 Likes on 0 Posts
From: VERO BEACH, FL
Default MCD SC 480 ESC
Wanting to run 3 Graupner 12v 700s on 14.4 or 16.8v, in parallel, does anyone have any experince with this esc, thanks, Randy (MCD 480 ESC)
By the way I have, and am running 2 graupner 700s on 12v with one proboat esc. I have had about 5 good runs, sometimes holding the throttle at full for about 30 seconds and the esc only gets a little warm.
The 700s are rated at 12.5 amps at max. eff, and at 43amps stalled.
hansvonpensch is offline  
Reply Like