RCU Forums - View Single Post - YS .63 Problem
Thread: YS .63 Problem
View Single Post
Old 04-23-2003 | 11:52 PM
  #2  
Dave Shadel
Senior Member
 
Joined: Apr 2002
Posts: 5,385
Likes: 0
Received 1 Like on 1 Post
From: Gardnerville, NV
Default YS .63 Problem
Idle is set too lean. Close the airbleed screw 1/4 to 1/2 turn and see how it acts.
Dave Shadel is offline  
Reply Like