RCU Forums - View Single Post - thread lock on servo screws?

03-24-2008 | 08:54 PM

#4

RCKen

RCU Forum Manager/Admin

My Feedback: (9)

Joined: Jul 2002

Posts: 28,246

Likes: 0

Received 31 Likes on 27 Posts

From: Lawton, OK

RE: thread lock on servo screws?

Agreed. Don't use threadlock on them. It should only be used on metal to metal contact. Just snug the servo screws down tight (but don't over tighten them) and you will be fine. I've never had one come out yet.

Ken

Reply Like