Here's what I got to bend for my center skidplate, 6"x24" 16 gauge sheet metal. Now the fun part is that I only have a dremal to cut it, that's going to take some work. It's going to take some time but when I'm done I'll post some pictures. Now it's time to find something to use to bend it. When it stops raining I'm going to see if there are any poles around here with the right curve to it. Unless the 12 or 14 gauge metal my friend has will work for a wheelie bar, I might use the scraps from that for the wheelie bar and just make a suport brace to stop the flex.