RCU Forums - View Single Post - PERIGEE Prototype Kit Build
View Single Post
Old 05-22-2008 | 09:30 AM
  #110  
kingaltair
My Feedback: (4)
 
Joined: May 2005
Posts: 1,975
Likes: 0
Received 1 Like on 1 Post
From: Asheville, NC
Default RE: PERIGEE Prototype Kit Build

I spoke briefly by phone with Dan Gipe from Wing Mfg. He said that with everything he has going on, and the relatively limited interest[X(] [] in the Perigee, he may not decde to produce the kit.

If you are waiting for Bob's kit to come out, or if you are taking a "wait-and-see" attitude about whether or not you may be interested in the Perigee, this might be best the time to contact Dan and tell him of your interest. There is no sense for him to go to the expense of developing a construction manual with pictures and all the other expenses involved in coming out with a new kit if only a handful of kits will be purchased, however if there is interestit makes sense to follow through.

If you are interested as I am, contact Dan Gipe at:

http://www.wingmfg.com/

OR

(269) 665-9630

Duane