RE: Composite-ARF Integral, kinda build thread
I test flew my new one yesterday. It's very true and neutral. At this point I'm going to either need no mixing on knife edge or at the very most 1 of 2 percent on a mix. I set the CG at 1/4 " from the leading edge of the tube. The wing has 1/2 degree of positive and the stab is at 0. The plane is equiped with a Losardo custom wing. The AUW of the wing panels is 412 grams or 14.5 oz. with the JR 9411sa servo's.
The rudder is super effective so I have to fly it awhile and get used to it. All in all a much better than average debut. Here's a few pics of it at the field. Mike