Hi Everyone,
I am putting together the Executive Jet at the moment.
Without starting a debate! (I have read every forum I could find on this topic), what is the best option regarding the BEC's.
1. Is it ok to have them both providing power to the receiver, or should I remove one of the red wires from one of the ESC connectors?
I have the HET F4 Phantom that's a twin. This setup works very well. Each motor has its own battery and ESC. I disabled the BEC on one of the ESC's and used a Y harness to the throttle channel for the ESC's. Simple and it works very well.
FB