RCU Forums - View Single Post - DL-50 engine
Thread: DL-50 engine
View Single Post
Old 06-07-2008 | 10:00 PM
  #1911  
Super08's Avatar
Super08
My Feedback: (2)
 
Joined: Dec 2007
Posts: 4,121
Received 1 Like on 1 Post
From: Fort McMurray, AB, CANADA
Default RE: DL-50 engine

I used 3" standoffs and 5mm hardware with extra large washers behind the firewall. It lands like a kittycat at a slightly elevated idle. I'm guessing about 2000 rpm. I was surprised at how easy it was to land. The standoffs were made my Roger Forgues.(Forgues Research) He posts here on the forum.