RCU Forums - View Single Post - 3D Model for a Saito 1.25 4-Stroke
Thread: 3D Model for a Saito 1.25 4-Stroke
View Single Post
Old 06-11-2008 | 07:01 PM
  #14  
rajul's Avatar
rajul
Moderator
My Feedback: (58)
 
Joined: Jun 2002
Posts: 8,251
Likes: 0
Received 3 Likes on 3 Posts
From: Missouri City, TX
Default RE: 3D Model for a Saito 1.25 4-Stroke
Hi Alan, in the QQ video, the weight was stated as 8lb 13oz. That was with the 120AX. The weight difference between the 120AX and FA125 (both with muffler) is 29.9-24.8=5.1oz. Therefore the same plane setup with a FA125 should work out to be around 8.5lb, and with some weight savings to bring it down to close to 8lb
rajul is offline  
Reply Like