RCU Forums - View Single Post - Composite-ARF Integral, kinda build thread
Old 06-30-2008 | 01:02 PM
  #716  
Nickolas's Avatar
Nickolas
Senior Member
 
Joined: Jun 2004
Posts: 917
Likes: 0
Received 0 Likes on 0 Posts
From: Athens, GREECE
Default RE: Composite-ARF Integral, kinda build thread


ORIGINAL: JAS

Nikos,

Here are a few things we've found here. My friends glow Integrals with both a 160 and 170 really like the speed with the 18.1x10 props. It is plenty fast enough when needed and the downlines are really slow. 30% CP with both. We've also found that my middle rate aileron works well with my low rate rudder and elevator for snaps and general flying. Nice looking Integral, keep us posted with your final set-up.

Chad,

You new Integral looks good... maybe we should make your scheme the new stock scheme...lol.
Jason thanks for the answer,

My final setup regarding throws etc. is the one recommended by you, not the one in the manual- but the latest one. I will try this condition for snaps. [sm=thumbs_up.gif]

18.1x10 and 18.1x10W are already ordered and are in the post (Jason's rules[sm=49_49.gif], [sm=thumbs_up.gif]), also have a Mejzlic 18x10 that could also worth a try and is light.

Papaone thanks for your feedback, probably this prop is a bit heavy for Summer in Greece due to the high temp, I will probably give a try in winter.

Thanks again,

Nikos