First of all let me state I've been flying 3 years and know how to properly tune a glow engine on the low and high end to prevent overheating. I like this forum because of quick response and a willingness to help. Here Goes:

Engine overheating with 2 deadsticks. Everything tweaked for maximum rich/cool operation.
I have an Aeroworks Edge 540T .46-.61 size with a Tower Hobbies .75 ABC 2 stroke glow engine.
The engine was properly broken in on a test stand. Very happy with engine performance and seems to be reliable.
10% nitro 18% oil Byron fuel and a 14X4 prop. Fox long glow plug.
Cowl is cut for both maximum entry/exit.

Looking for answers on what to do. I was told try an OS #8 glow plug or a cooler glow plug. Ideas appreciated.
I was also told to add baffles. Not familiar with this.
Any other ideas appreciated.

Regards,
Mike