ORIGINAL: rorrock

Todd,
I can provide them, they are made in partnership with a local electronics company..

The Specs Are
Switching current: 2A
Switching speed: 0.05~0.10 seconds (safety feature aspect - see below)
Output connections: Common, N/O and N/C
Size: 40x14x14mm (with heatshrink on).
Weight: 13g
Servo lead length: 300mm
Input voltage : 4.0V to 7.2V

SAFETY FEATURES

Requires at least 5 good frames before comitting a switch to a different state
If TX signal is lost, reverts to relay default setting (after ~0.5sec of constant loss)
Relay outputs isolated from R/C circuitry
Circuit is reverse-polarity protected
Led to show if relay is active for troubleshooting.

Rob