RCU Forums - View Single Post - YS 140FZ Needs assistance
View Single Post
Old 08-29-2008 | 05:39 PM
  #3  
3D_Junkie
Senior Member
 
Joined: May 2007
Posts: 226
Likes: 0
Received 0 Likes on 0 Posts
From: League City, TX
Default RE: YS 140FZ Needs assistance

I agree, sounds like the regulator is not closing. You should not have fuel dripping out of the carb with the throttle at idle.

Also remember the low end is an air bleed screw so clockwise = rich and counter clockwise = lean