Maybe I can stuff a small block chevy in it now.Seriously, I made 2
hardwood rails out of 1/2 by 1/2 and tied into the bulkhead thru the firewall where the old cowl blocks were.The new rails stick about the same amount as the old cowl blocks, I had to notch out where the rails came thru the firewall.Its hard to explain how I did it but the main thing is it is fixed.Lots of epoxy and 4 small screws along with 3/8 tri stock between the blind nut space.Now all I have to do is put the motor mount on and remount the throttle servo and its out to the field Monday.Don't pay any attention to Tim, he flys the big birds that make him look good .Lol
.

Later Guys, Doc