Humm, I've got a 1/4 scale Lanier Laser 200 kit in the garage. The fuselage and the flying wires on the tail look right. Then things go wrong from there. The Lainer Laser 200 has a tube connector for the wing halfs. It looks as if yours has ply spars that bolt to a ply cross member. That is like the Extra 230 33% kit I have from ACE. The cowl doesn't look quite right either. Could be wrong

There is a thread on the flying giants site for a 1/3 scale laser 200. It might be that one as I'm fairly sure my 1/4 scale is less that a 87" wing span. http://www.flyinggiants.com/forums/f...ser-200-a.html
You will have to sign up to see the photos I found.

Don