RCU Forums - View Single Post - Hover question.
View Single Post
Old 10-10-2008 | 07:59 PM
  #23  
FAST-J
Member
 
Joined: Jun 2008
Posts: 73
Likes: 0
Received 0 Likes on 0 Posts
From: Greenville, MS
Default RE: Hover question.

Well guy's, Boy have i made alot of changes, first i have upgraded the servos, rudder i now have a futaba s3305 (works great) and elevator and ailerons now have s3310, much better!! I have also said the heck with the JBA 91 (never wanted to run rigt a 45 degree mounting) and got an O.S. .91FX, this is one sweet engine, no problems at any rpm, i have only flown with new servos once, and the engine has about 1 1/2 gallons through it. At this point i think the plane maybe a little tale heavy because even at a 1/2 tank of fuel she gets real tail heavy (running 12oz tank) and comes in with the noise up with no elevator, does this sound like i am thinking right about the c.g.? When in the air doing almost any manuever i barely have to touch the elevator and is on low rate, and also if i give to much it wants to snap left real crazy at high or low speeds, what could this be?

Thanks, Jay