RCU Forums - View Single Post - Roo, cg and control throws
Thread: Roo, cg and control throws
View Single Post
Old 05-27-2003 | 01:09 AM
  #2  
Bill_Jehle
Senior Member
My Feedback: (1)
 
Joined: Dec 2001
Posts: 349
Likes: 0
Received 0 Likes on 0 Posts
From: Stuart, FL
Default Roo, cg and control throws
Perry,

CG at front flange screws of main gear. Throws at 25 mm on elevator and aileron. However, dual rate the ailerons for 15 mm as the roll rate is quite high at 25 mm. Do a search for Roo CG and throws and you will find more info. Have fun.
Bill_Jehle is offline  
Reply Like