RCU Forums - View Single Post - Twin Otter 125inch wingspan
View Single Post
Old 10-21-2008 | 02:35 AM
  #53  
FD av8r
Member
 
Joined: Oct 2002
Posts: 47
Likes: 0
Received 1 Like on 1 Post
From: Beaumont, AB, CANADA
Default RE: Twin Otter 125inch wingspan

I will have to try uploading a photo of mine from model builder plans. I built it over four years ago and did one flight that showed it needed some "trimming" before attempting again. It is done up in the Canadian Forces colors of the photo. I work in ATC and deal with the Vampire flights out of Yellowknife (VMPR02 is their exact designation). I built the model as my father flew this aircraft with 440 Squadron when they were based out of Namao (Edmonton).

It was a big project with such limited details on the plans/instructions but I think it came out good enough for me. Stand way back scale as it were. I really should put some motors and electronics back into it and get it ready for next spring.

I can be contacted for photos or questions at the address below.

Daryll

[email protected]

[img][/img]


Attached Thumbnails Click image for larger version

Name:	Bz79599.jpg
Views:	333
Size:	53.1 KB
ID:	1056077