RCU Forums - View Single Post - Newbie in YS engines
View Single Post
Old 11-10-2008 | 09:05 AM
  #7  
HoverLoW's Avatar
HoverLoW
 
Joined: Nov 2004
Posts: 436
Likes: 0
Received 0 Likes on 0 Posts
From: Varginha, BRAZIL
Default RE: Newbie in YS engines

Hello, guys!

First of all, thank you for the advices.

BTW, I took all of it and now I am running the 16x6 in much better tune.

Is everything almost fine, except for one detail.

I was running my engine with the low speed very rich. Rich enough to the engine becoming totaly wet and die after some minutes flying.

So, I just open a little the LS screw (to make it more poor) and I got a perfect tune. But after some good flying, when I am coming to land, the LS is totaly different than when I took off. Very, very high. I even can land the plane. I need to kill the engine first.

That's the situation. When I put the LS rich, the engine dies wet. When I put it more poor, the idle become very high after some flight to land.

What can I do?

The rest is OK. The high speed is perfect and I have power to share!