RCU Forums - View Single Post - Servo voltage
View Single Post
Old 12-11-2008 | 10:41 AM
  #6  
Zeeb's Avatar
Zeeb
My Feedback: (41)
 
Joined: Nov 2004
Posts: 5,740
Received 73 Likes on 60 Posts
From: St George, Utah UT
Default RE: Servo voltage


ORIGINAL: A.T.


"Mike Mayberry posted on another forum about the new 7XXX series being cleared for unregulated Li-Po/Li-Ion use" Have not received this information nor able to locate such post and welcome clarification.
Regards
Alan T.
Well I'm not sure how I can get you a way to find this thread as the RCU server will strip out any links to this forum....

It's on FG in the "Transmitters, receivers, servos & Navigation" section of the forums. The thread title is "NEW!!! Hitec 7955's" and it is post number #297 in that thread.

Here is the quote:

"FYI: We just received the results of our long term testing on the 7955TG with 2S Lipo, and I'm pleased to say that we have found no degradation in the servos life expectancy at this voltage. Therefore Hitec will officially announce soon that the 7955TG's are HV capable with the following specs: .13sec @ 375in/oz at 7.4v!

"Me too" servo? I think not!


Mike Mayberry
Hitec/Multiplex USA. "