RCU Forums - View Single Post - DL-50 Set Up
Thread: DL-50 Set Up
View Single Post
Old 01-03-2009 | 10:01 PM
  #6  
bjor's Avatar
bjor
Senior Member
 
Joined: Oct 2005
Posts: 323
Likes: 0
Received 0 Likes on 0 Posts
From: Brisbane, AUSTRALIA
Default RE: DL-50 Set Up

If only we had a 6 pack for everybody we helped
It's not rocket science but setting up a gasser requires some initial knowledge. If you need to ask the question about where to put the "pressure line from the exhaust" then you will certainly have issues in setting up and running a glitch free gas engine. Things like no metal to metal to the throttle, seperate CDI batteries and switches, keeping a good distance between the CDI and Rx etc etc etc. Certainly not rocket science but for somebody new to gas it can sometimes be just as confusing. Don't ever be afraid to ask for help from somebody at your local club - even without the 6 pack I'm sure they will bend over backwards to help.