Himoto...hurricane...Redcat....ansman....there all RTR level junk that will give you a Poor introduction to the REAL world of RC cars.......the motor's will pooch out within a gallon or 2...the stock servo's will prolly last a couple hours before they take a dump....you'll be lucky if you dont have to replace the whole Radio system with something that will actually work before you can actually have fun with the darn thing...and not to mention they are as weak as a pretzel............imo you made a poor moove in buying what you did.....sorry but its the truth.
You shouldn't over load your mind with the trivial junk and keep your worthless opinion to your self if you can't be objective about the product. Over half of your statement are straight out fabrication because you haven't got enough experience to do anything but blow smoke. Product quality has come up with leaps and bounds as the CEO of Redcat works on his stock to become competitive in the Hobby. Just one good example about your fabricating lies about the Redcat product. The P3 SH engine is one of the best basic .28 engines on the market.............All the old Redcat 1/8's have those engines..........almost all the 1/10 Redcats are being equiped with the ever sturdy .18 SH engine. So please get your story at least a little straight before you try and start rumors that are untrue. Its not fair to the new people on this forum or the Redcat / XTM / who ever it is you don't like. [>:]