Ok guys I feel like an idiot.......... I re-read the manual and realized I was setting the needles wrong, I got mixed up with the high speed and low speed settings........ When it was talking about closing the needle and then opening it up 2-3 turns for some reason I was thinking it was talking about the low needle lol (yeah I'm new to RC's so don't be to harsh) so what I was doing was closing the high speed and I opened that up 3 turns, and I closed the low speed and opened that 2 turns......... so this was causing my problem......... I'm not at home so I can't try it out but I'm positive that was my problem.... The directions call for making the low end needle flush then closing it a 1/2 turn for it to be set back to factory................ MAN I FEEL LIKE AN IDIOT RIGHT NOW, BUT HOPEFULLY THAT FIXES THE PROBLEM WHEN I GET HOME ;-)