Hi I would like to get some Maxamps power for my E-Revo but I dont understand how to count the cells in the packs. I will be using a Novak 4 cell lipo cutoff (part # 5471). I think what I need will be 2S2P lipos but I am getting the impression that this type of battery is actually made up of 4 individual cells. This would mean that two of these batteries together would be 8 individual cells?? In case you can't tell I'm really confused on the whole subject. I have try'ed to figure this out on my own and have learned quite a bit about lipo power but can't seem to find definitive information on what battery configurations this lipo cut off was designed for. The instructions from Novak do a pretty good job of explaining different ways to wire everything up but they don't help much with the proper battery applications. If Lipos weren't such an investment I would be less afraid to experiment, but they are far to expensive to take chances. Any help would be much appreciated.