RCU Forums - View Single Post - Honey Bee FP MK3 problem
View Single Post
Old 02-11-2009 | 10:20 PM
  #8  
nitrostaff1's Avatar
nitrostaff1
Senior Member
 
Joined: Oct 2006
Posts: 2,219
Likes: 0
Received 0 Likes on 0 Posts
From: LA, CA
Default RE: Honey Bee FP MK3 problem

this is true reguardless of any heli. Even with the gy401, with suddent burst of trottle the tail swings. You can increase the gain on the 4 in 1 gyro and see if that'll work.

John
Nitro Planes

ORIGINAL: Dr. Dave

Well, this seems as good a place as any. I have the same heli (honey bee fp mk3) and the tail won't hold. Any ideas?

I fly many other heli's (King2, T-Rex 450, etc...) and don't have this problem with them. I do enjoy flying the FP around the house, for fun.

Anyway, I also fly a Falcon 40 around the house and the tail is strong and wonderful. I've tried every setting and even replaced the tail motor.

The basic problem is when a quick burst of throttle is used the tail will swing ~90 degrees and I have to fight it back.

Thanks in advance for any assistance.