RCU Forums - View Single Post - Top Cap with 50 SX Maiden!
Thread: Top Cap with 50 SX Maiden!
View Single Post
Old 06-11-2003 | 06:45 PM
  #6  
serge1's Avatar
serge1
Senior Member
My Feedback: (1)
 
Joined: Oct 2002
Posts: 955
Likes: 0
Received 0 Likes on 0 Posts
From: DES RUISSEAUXQu颥c, CANADA
Default Top Cap with 50 SX Maiden!
Originally posted by stomper
Serge
I have a JR 4721 at 120 oz on the rudder,so no problem here. The 3003 at 44 oz may not be enough to hold the plane. These planes really should have the elevator and rudder surfaces on a good ball bearing servos. This plane with a aft CG is a lot of fun to fly low and slow harrier figure eights just off the deck

Doug

Thanks Doug!


I am gonna switch the rudder servo tonight.

Serge
serge1 is offline  
Reply Like