RCU Forums - View Single Post - Robbe/Ripmax Help
View Single Post
Old 02-18-2009 | 05:57 PM
  #4  
c/f
My Feedback: (1)
 
Joined: Jan 2002
Posts: 907
Likes: 0
Received 11 Likes on 10 Posts
From: evansville, IN
Default RE: Robbe/Ripmax Help

It has a dip switch setting for 7 or 12, yet a chart appears to show that the most assignable is using the FASST 608 FS rx for a total of 8 chnl usable. It also appears to show the FASST 6014 FS rx is only usable with the MX22 radio still limited to 8 channels.

Should be no problem since when the DX7 came out allot of people jumped shipped on 10X and figured out how to setup jets on a 7chnl TX, a search should reveal acceptable results.

Thanx ALI I'll check that bind process out.......Remember me if/when directions become readily available.