Yeah...i was looking at those...there's quite a few "bad" reports as well however but i'll have to look at these reports closer to see if its "user error" I suppose its fairly common to attach this to a servo on one axis to say move the cam from looking forward to looking down. I guess my question was when one adds a servo, how does one allocate a new servo you bought to your tx. My current tx has a free axis on the throttle (forward/back=throttle, but its side to side sxis is free) so I'm not even sure my tx can handle any more servos but this free axis makes me think i'd be able to buy a servo for a cam and use it with my tx....obviously all this is far in the future. Thanks!