I have a Jammin X1-CR. After breaking in the motor I took it to the track and ran a few tanks of fuel through it. Getting a little overconfident, the car got quite a bit of air and when it landed it wouldn't move but the engine was still running. I though that I may have burned the clutch shoes out with a little too much throttle in the air so I changed the shoes. The car wouldn't run and I put it away for a few years. Excited to get it going again, I started it up and at higher RPM's the car starts to go backwards a bit. I checked the cluth shoes and it appears they are installed correctly. When I move the main gear in the direction the motor turns while the car is on the bench (all wheels touching the bench) , the back wheels turn forward but the front wheels turn backwards.</p>

Can anyone give me some insight as to what might be happening? I would really like to get this car back in action.</p>

Thanks!</p>