RCU Forums - View Single Post - 4050kv Align Motor
View Single Post
Old 05-26-2009 | 12:15 AM
  #2  
Cleared2Engage's Avatar
Cleared2Engage
Senior Member
 
Joined: Mar 2007
Posts: 601
Likes: 0
Received 0 Likes on 0 Posts
From: Oxnard, CA
Default RE: 4050kv Align Motor

I used it for a while with an 11 tooth pinion.  It was a good motor.  Then after a year and a half of hard flying it decided it no longer wanted to turn.  So now i'm using the 3700 w/ 13 tooth pinion.  Feels about the same.